MCO-170AICUVD CO2 Incubator Heat Sterilization
| Previous | 1 / 4 | Next |
Download Files
PHCbiCO2_Incubators_MCO170AICD_MCO170AICDL_MCO170AICUVD_MCO170AICUVDL.pdf (473.84 KB)Optimising cell culture outcomes and reproducibility
The IncuSafe MCO-170AICUVD CO2 Incubator provides precise control of CO2 concentration and accurate, uniform, and highly responsive temperature control within the chamber. During cell culturing the inCu-saFe germicidal interior and SafeCell UV lamp work continuously to prevent contamination. The incubator’s Dual heat sterilisation utilises the incubator’s two heaters during the 180°C sterilisation process, which takes 11 hours. There is no effect on temperature inside stacked incubators due to low heat dissipation, cell culturing can continue uninterrupted.
Precise & Regulated Environment
InCu-saFe and SafeCell UV both function to prevent contamination. The direct heat system and melamine foam insulation ensure optimal temperature distribution throughout the chamber whilst the Dual IR sensor controls the CO2 level.
Dual Heat Sterilisation
Dual heat sterilisation utilises the incubator’s two heaters during the 180°C sterilisation process, which takes 11 hours. There is no effect on temperature inside stacked incubators due to low heat dissipation, cell culturing can continue uninterrupted. No need to remove inner parts or recalibrate after sterilisation, therefore laboratory processes are more efficient with less incubator downtime.
Simultaneous Use of Stacked Units
The melamine foam insulation limits heat dissipation during dry heat sterilisation. This means that cell culture can continue uninterrupted in incubators stacked with those actively running sterilisation.
Ease of Use & Maintenance
A full colour LCD touch-screen allows full control even with gloved hands. Transfer of data is easy via a USB port. The easy-to-clean incubator interior features fully rounded corners and integrated shelf supports.
The IncuSafe MCO-170AICUVD CO2 Incubator provides precise control of CO2 concentration and accurate, uniform, and highly responsive temperature control within the chamber. During cell culturing the inCu-saFe germicidal interior and SafeCell UV lamp work continuously to prevent contamination. The incubator’s Dual heat sterilisation utilises the incubator’s two heaters during the 180°C sterilisation process, which takes 11 hours. There is no effect on temperature inside stacked incubators due to low heat dissipation, cell culturing can continue uninterrupted.
Precise & Regulated Environment
InCu-saFe and SafeCell UV both function to prevent contamination. The direct heat system and melamine foam insulation ensure optimal temperature distribution throughout the chamber whilst the Dual IR sensor controls the CO2 level.
Dual Heat Sterilisation
Dual heat sterilisation utilises the incubator’s two heaters during the 180°C sterilisation process, which takes 11 hours. There is no effect on temperature inside stacked incubators due to low heat dissipation, cell culturing can continue uninterrupted. No need to remove inner parts or recalibrate after sterilisation, therefore laboratory processes are more efficient with less incubator downtime.
Simultaneous Use of Stacked Units
The melamine foam insulation limits heat dissipation during dry heat sterilisation. This means that cell culture can continue uninterrupted in incubators stacked with those actively running sterilisation.
Ease of Use & Maintenance
A full colour LCD touch-screen allows full control even with gloved hands. Transfer of data is easy via a USB port. The easy-to-clean incubator interior features fully rounded corners and integrated shelf supports.
| Specifications | |
| External Dimensions (W x D x H) | 620 x 755 x 905 mm |
| Internal Dimensions (W x D x H) | 490 x 523 x 665 mm |
| Volume | 165 liters |
| Net Weight | 80 kg |
| Temperature Control Range & Fluctuation | AT +5 ~ +50, ±0.1 °C |
| Temperature Uniformity | ±0.25 °C |
| CO2 Control Range & Fluctuation | 0 ~ 20, ±0.15 % |
| O2 Control Range & Fluctuation | - |
| Humidity Level & Fluctuation | 95, ±5 %RH |
| Sterilisation Method | Dry heat sterilisation, 180°C, 11 hours |
| Temperature Sensor | Thermistor |
| CO2 Sensor | Dual IR |
| O2 Sensor | - |
| Display | |
| Exterior Material | Painted Steel (rear cover not painted) |
| Interior Material | Stainless Steel Copper-Enriched Alloy |
| Insulation Material | Melamine resin foam |
| Heating Method | Heater jacket |
| Outer Doors | 1 |
| Outer Door Lock | Standard |
| Field Reversible Door | Included |
| Inner Doors | 1 |
| Shelves | |
| Shelf Dimensions (W x D x H) | 470 x 450 x 12 mm |
| Max. Load Per Shelf | 7 kg |
| Max. Shelf Capacity | 10 |
| Access Port | 1 |
| Access Port Position | Rear Upper Left |
| Access Port Diameter | 30 |
| Power Failure | R |
| Out of Temperature Setting | V-B-R |
| High Temperature | V-B-R |
| Out of CO2 Setting | V-B-R |
| Out of O2 Setting | - |
| Door Open | V-B |
| Power Supply | 220V - 240V |
| Frequency | 50/60Hz |
| Noise Level | 25 dB [A] |
| Dimensions |
